Circuit Scribe Maker Kit
Description
- Circuit scribe maker kit
- Non-toxic, silver conductive ink pen
- Contains 11 modules
- Includes 9V battery, steel sheet, stencil and accessories
The Circuit Scribe Maker Kit contains a pen, eleven modules, a 9V Battery and other accessories to improve your circuit drawing experience. This kit allows you to explore all the concepts that the basic kit presents, while improving your understanding of different ways to input, process and output signals in your circuits. Additional topics to explore include light, timed circuits, piezoelectric materials, and more.
- 9V battery adapter with 9V battery
- 2x Bi-LED
- SPST switch
- NPN transistor
- 2-Pin Adapter with 5x resistors (100, 1k, 10k, 100k and 1M ohm)
- 2x capacitors (0.1uF, 1.0uF)
- 1x photoresistor (10k ohms)
- Potentiometer - 10k ohms
- Blinker
- Buzzer
- RGB LED
- Light sensor
- Conductive ink pen
- Circuit stencil
- Jumper sticker sheet
- Steel sheet
Really well thought out. Each lesson in the workbook has a drawing of the circuits you need to build. Just put the metal plate that comes with the kit beneath the page, fill in the lines with the conductive ink pen, and place the modules on the page right were it says to. The magnets in them will keep them stuck to the page thanks to the metal plate under it. I wish there had been more lessons. It only took my 11 year old two or three "sittings" totalling no more than two hours to work through the little workbook. And a couple of the lessons require parts that aren't included in this kit. But he enjoyed it and it kept his interest. With more encouragement and a bit of parental participation we should be able to get more use out of this kit. We still have lots of ink in the pen. The ink has a fairly high resistance: thick short lines work best. More like colouring a colouring book than drawing. We sometimes had trouble getting a good connection through the ink and had to wiggle and slide some modules to find that spot where the ink was thick enough to provide good contact. Maybe we were a little too conservative with our ink usage.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at RoboItchi's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RoboItchi's troubleshooting process or of a verified shipping error by RoboItchi.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A ¥10,000 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RoboItchi's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RoboItchi and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
To request a return, submit a support ticket from your account under My Support Tickets to obtain a Return Authorization (RA) number. Returns without an RA number will be refused.
