Elecrow RA-08H LoRaWan Node Board with RP2040 Controller for Long Range (915MHZ)
Compatible with LoRa point-to-point transmission and LoRaWAN network
Equipped with inbuilt lithium battery charging and discharging circuit
Supports solar panel charging for outdoor use
Programmable in both Arduino and MicroPython for flexible development
The Elecrow RA-08H LoRaWan Node Board w/ RP2040 Controller for Long Range (915MHZ) utilizes the RP2040 as its primary controller, while the RA-08H module facilitates LoRa transmission and reception functions. This module is compatible with LoRa point-to-point transparent transmission and the LoRaWAN network.
When paired with four types of Crowtail sensor modules (Ax2/Dx2/IICx1/UARTx1), a Lora node can be swiftly established. The module comes with two firmware versions for 868/915 MHZ to cater to diverse usage requirements.
Designed with outdoor use in mind, the module is equipped with an inbuilt lithium battery charging and discharging circuit. It also features an interface that supports solar panel charging, simplifying the process of setting up and using the node outdoors.
The Lora RA-08H node module boasts six interfaces that are compatible with commonly used sensors such as those for temperature and humidity, air quality, light, and PM2.5. This makes it an ideal choice for swiftly establishing a Lora weather station, as well as for projects related to smart homes, smart factories, and smart logistics.
The module also includes a 20-pin header and a double-row pin header in the accessories, offering the flexibility to choose whether to solder it or not, thereby supporting a wider range of development options. The RA-08H is programmable in both Arduino and MicroPython, facilitating rapid and agile development for users.
Main Chip: Raspberry Pi chip RP2040, with built-in 264KB SRAM and onboard 4MB Flash
Processor: Dual Core Arm Cortex-M0+ running at 133 MHz
RA-08H Supports frequency band: 803-930 MHZ
RA-08H Support Interface: External antenna, SMA interface, or IPEX first-generation interface
Development environment: Arduino/Micropython
Interface: 1x USB-C interface, 6x 5V Crowtail interfaces (2x analog interfaces, 2x digital interfaces, 1x UART interfaces, 1x IIC interfaces), 2x10 universal GPIO interfaces, 1x Battery Interface, 1x Solar Interface
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at RoboItchi's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RoboItchi's troubleshooting process or of a verified shipping error by RoboItchi.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A ¥10,000 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RoboItchi's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RoboItchi and ordered specifically to fulfill a customer request.
To request a return, submit a support ticket from your account under My Support Tickets to obtain a Return Authorization (RA) number. Returns without an RA number will be refused.