Waveshare CH343G USB to RS232/485/TTL Interface Converter, Industrial Isolation

WaveshareSKU: RB-Wav-604
Manufacturer #: USB TO RS232/485/TTL (B)

Price  :
Sale price ¥3,577

Tax included Shipping calculated at checkout

Stock  :

Re-stocking soon See due date

Notify me when this product is in stock

Payments and Security

Apple Pay Discover JCB Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • CH343G USB to RS232/485/TTL Interface Converter, Industrial Isolation by Waveshare
  • Offers high-quality USB-B and RS232 connectors
  • Aluminum alloy enclosure
  • Fast communication, stable and reliable, better compatibility
  • Fully automatic transceiver circuit with no delay
  • Onboard self-recovery fuse and protection diodes

The Waveshare CH343G USB to RS232/485/TTL Interface Converter, Industrial Isolation is a USB bus converter chip, which converts USB to high-speed serial UART interface, supports automatic identification and dynamic adaptation of communication baud rate of 115200 bps and below, provides common MODEM signal, to expand serial UART interface of a computer or upgrade common serial devices or MCU to USB bus directly. 

  • 1x USB Converter
  • 1x USB Cable ~1.2m

Size

  • 86.5 x 71.6 x 27.4 mm (L x W x H)
  • USB Cable Length: ~1.2 m
  • USB: Operating Voltage: 5 V | Connector: USB-B | Protection: 200 mA self-recovery fuse, isolated output
  • Operating Environment: Temperature: -15 °C ~ 70 °C | Humidity: 5% RH ~ 95% RH
  • Operating System: Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7
  • Weight: 196 g

RS232

  • Connector: DB9 male
  • Protection: TVS diode, surge protection & ESD protection
  • Transmission mode: Point-to-point
  • Baud rate: up to 600000 bps (not full band)

RS485

  • Connector: Screw terminal
  • Pins: A+/B-/GND
  • Direction control: Hardware automatically discriminates and controls the direction of data transmission
  • Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (reserved 120R balancing resistor solder pads
  • Transmission mode: Point-to-multipoint (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
  • Baud rate: up to 2 Mbps (not full band)

TTL (UART)

  • Operating Voltage: 3.3V / 5V
  • Connector: Screw terminal
  • Pins: TXD, RXD, GND, 5V
  • Protection: clamp protection diode, over-voltage/negative-voltage proof, shock resistance
  • Transmission mode: Point-to-point
  • Baud rate: up to 2 Mbps (not full band)

Indicators

  • PWR: Red power indicator, light up when there is a USB connection and voltage is detected
  • TXD: Green TX indicator, light up when the USB port sends data
  • RXD: Blue RX indicator, lights up when the device ports send data back

Estimate shipping

You may also like