The Adeept Uno Ultimate Starter Kit is a more comprehensive kit than other Uno Kits. It contains more than 50 kinds of different electronic components, and more than 180 components.
Based on experiments with Arduino, the interaction between the Arduino and processing have been added, so that you can use the Arduino and some simple components to make your own video games, such as gluttony snake, the war and so on.
With this kit, you will be taken from knowing to utilizing, you will be able to do more experiments, get more ideas into real action without the restriction of hardware and software.
As well, the kit includes a carefully prepared a guidebook (PDF Version) with supporting experimental code routine, including a total of 37 experiments.
1 x Adeept Arduino UNO R3 Board
1 x CD
1 x ADXL345 Acceleration Sensor
1 x Ultrasonic Distance Sensor
1 x IR Receiver HX1838
1 x Remote Controller
1 x PS2 Joystick Module
1 x Relay
1 x Stepper Motor
1 x ULN2003 Stepper Motor Driver Module
1 x DHT-11 Temperature & Humidity Sensor
1 x LED Bar Graph
1 x Active Buzzer
1 x Passive Buzzer
1 x PIR Movement Sensor
1 x Servo
2 x Analog Temperature Sensor (Thermistor)
1 x Breadboard Power Supply Module
1 x 4*4 Matrix Keyboard
1 x DC Motor
1 x L9110 DC Motor Driver
1 x LCD1602
1 x Dot-Matrix Display
1 x 7-Segment Display
1 x 4-bit 7-Segment Display
1 x NE555 Timer
2 x 74HC595
2 x Light Sensor (Photoresistor)
2 x Tilt Switch
2 x Switch
1 x RGB LED
8 x Red LED
4 x Green LED
4 x Yellow LED
4 x Blue LED
16 x Resistor (220 Ω)
10 x Resistor (1kΩ)
10 x Resistor (10kΩ)
2 x Potentiometer (10KΩ)
5 x Capacitor (104)
4 x Capacitor (10uF)
4 x Button (large)
8 x Button (small)
1 x Button Cap (red)
1 x Button Cap (white)
2 x Button Cap (blue)
2 x NPN Transistor (8050)
2 x PNP Transistor (8550)
2 x 1N4148 Diode
2 x 1N4001 Diode
1 x Battery Holder
1 x Breadboard
1 x USB Cable
40 x Male to Male Jumper Wires
20 x Male to Female Jumper Wires
1 x Header (40pin)
1 x Band Resistor Card
1 x Project Box
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at RoboItchi's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RoboItchi's troubleshooting process or of a verified shipping error by RoboItchi.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A ¥10,000 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RoboItchi's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RoboItchi and ordered specifically to fulfill a customer request.
To request a return, submit a support ticket from your account under My Support Tickets to obtain a Return Authorization (RA) number. Returns without an RA number will be refused.