Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応
Elecrow Mbits ESP32 開発ボード Let’s code (Scratch 3.0) / Arduino対応

Elecrow Mbits ESP32 Dev Board based on Letscode Scratch 3.0, Arduino

Save ¥1,196
ElecrowSKU: RB-Ecw-59
Manufacturer #: MIB26580B
Price  :
¥1,571 ¥2,767

Tax included Shipping calculated at checkout

Returns are not accepted on Special Order and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Payments and Security

Apple Pay Discover Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • Elecrow Mbits ESP32 Dev Board
  • Supports Letscode (based on scratch3.0) and Arduino IDE
  • Offers wireless connectivity with built-in 2.4GHz micro:bit radio
  • Pocket-sized microcontroller
  • Provides two programmable buttons
  • Onboard MEMS microphone, speaker, 25 RGB LEDs
  • Notched edge connector for easier connections

The Elecrow Mbits ESP32 Dev Board based on Letscode Scratch 3.0, Arduino is a pocket-sized microcontroller that has lots of features the same as Microbit V2. Mbits is an ESP32-WROVER-B based educational hardware suitable for kids to learn how to program and experience hot topics such as IoT and AI.

  • 1x Elecrow Mbits ESP32 Dev Board based on Letscode Scratch 3.0, Arduino

Size

  • 52 x 52 mm (W x H)

Website

  • Processor: ESP32
  • Memory: 4M Flash, 8M RAM
  • Onboard: MEMS microphone, 5x5 RGB LED, Accelerometer, 2 programable buttons, speaker, Temperature sensor
  • Edge Connector: 25 pins. 3 dedicated GPIO, ADC, PWM, I2C, SPI, and ext.power
  • Wireless: 2.4GHz Radio/BLE WiFi & Bluetooth 4.2
  • Power: 5 V
  • Current available: 500 mA
  • Software: Letscode, Arduino

Estimate shipping

You may also like