Full-Size Bare Breadboard (830 Tie Point)
Description
- Total of 830 tie in points
- All pins are spaced by a standard 0.1"
- Two sets of five columns are separated by about 0.3"
- Perfect for straddling a DIP package over
The Full-Size Bare Breadboard (830 Tie Point) is a full size solderless breadboard with 2 power buses, 10 columns, and 63 rows - with a total of 830 tie in points. The board accepts wire sizes in the range of 20-29AWG.
- 6.5 x 2.1 x 0.38" (165.1 x 54.29 x 9.68mm)
The board does what it says, but it's difficult to insert pins into the tie points. If you want to put any breakout board or micro-controller with lots of pin headers onto the board, it is nearly impossible. I've been able to help fix this by inserting long sets of header pins into the tie ins ahead of time and leaving them for a day or two, this has opened up the holes better and made it easier to insert components with large numbers of pins after removing the headers, when trying to put new components in.
connections are loose
You always need more breadboards. These are good products with modular power buses permitting to fit any arrangement.
Good quality, lots of room for prototyping.
C'est une planche de prototypage avec insertions précises et uniformes (contrairement à certaines autres où il faut parfois se battre un peu avec des efforts d'insertion variable selon le trou d'insertion utilisé. Les numéros de colonne sont bien alignés avec les trous. Qualité supérieure.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at RoboItchi's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RoboItchi's troubleshooting process or of a verified shipping error by RoboItchi.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A ¥10,000 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RoboItchi's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RoboItchi and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
To request a return, submit a support ticket from your account under My Support Tickets to obtain a Return Authorization (RA) number. Returns without an RA number will be refused.