Kitronik Deluxe Stereo Audio Amplifier Kit w/ 3.5mm Jack
Description
- Kitronik Deluxe Stereo Audio Amplifier Kit w/ 3.5mm Jack
- Compatible with any personal stereo equipment
- Includes two FM8002A mono amplifier ICs
- Powered by a 3x AA battery holder or USB port
- Ideal for teaching electronics and product design
The Kitronik Deluxe Stereo Audio Amplifier Kit w/ 3.5mm Jack is a high-quality audio amplifier kit that is compatible with any personal stereo equipment, including MP3 players and mobile devices such as tablets and phones equipped with a 3.5mm jack socket. The kit is designed with M3 mounting holes at each corner, allowing for easy and secure attachment to an enclosure.
This kit is an excellent resource for teaching electronics and product design in an educational setting, with comprehensive documentation available to facilitate high-quality lessons.
The kit is equipped with two FM8002A mono amplifier ICs, one for each channel. These are surface-mounted components that are pre-fitted to the PCB. Once the circuit is fully assembled and the speakers are attached, the amplifier can output 1.5W per channel into 8ohm speakers.
The kit also includes an on/off switch status LED and a dual wipe potentiometer volume control for easy operation. It is powered by a 3 x AA battery holder with flying leads. Please note that batteries are not included with the kit.
The kit requires a 5V supply and draws less than 100mA, making it suitable for powering with a standard phone charger or computer USB port. The two-way on/off switch allows for easy selection between power sources. If both batteries and USB power are connected, the USB option can be selected with the switch and turned off at the wall to power down. If only one power source is connected and selected, the switch can be toggled the other way to power down.
Please note that assembly and soldering are required for this kit. This kit serves as an alternative to the discontinued 2141 Deluxe Stereo Amplifier Kit, with similar features but differing power options.
- 1x Red 5mm diffused LED - 275mCd
- 1x PCB mount slide switch
- 1x Dual wipe potentiometer, 10K
- 1x 330R resistor
- 2x 1K resistor
- 2x 100R resistor
- 2x Ceramic Capacitor, 50V, 100nF
- 3x Electrolytic Capacitor, 50V, 1uF
- 1x Stereo Amp Cable
- 1x (3x AA) Battery Holder with Flying Leads
- 2x 8 Ohm 66mm Speaker
- 1x 1m Figure 8 Speaker Cable 2x (7x0.18mm)
- 1x Stereo Amplifier PCB with SMT parts pre-fitted
- PCB: 62 x 50 mm (L x W)
- Nominal Voltage: 4.5 V
- Voltage Range: 3 - 6 V
- Standby Current: 5.2 mA
- Max Current at Nominal Voltage: 57 mA
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at RoboItchi's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RoboItchi's troubleshooting process or of a verified shipping error by RoboItchi.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A ¥10,000 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RoboItchi's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RoboItchi and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
To request a return, submit a support ticket from your account under My Support Tickets to obtain a Return Authorization (RA) number. Returns without an RA number will be refused.