Description
- Can control 6 high-power loads
- Can control high-intensity LEDs, lamps motors and relays
- Status LEDs on each channel
- Each MOSFET is connected to an Arduino pin with PWM capability
The N-Drive Shield directly control up to 6 separate high-power loads such as high-intensity LEDs, lamps, motors, and relays. Incorporates 6 N-channel MOSFETs, each capable of switching up to 60Vdc at 20 Amps. That's enough to drive massive loads such as 30W and 60W RGB LEDs capable of burning your eyeballs right out of year head!
All smiles here... This simple board is well designed, well constructed, well "documented" (i.e. very helpful / informative silk screen on PCB top). The "FET Status" LED's are a very helpful and thoughtful touch too. Some of the long Arduino header pins were slightly bent on arrival... but that will be true for nearly any shield board. Long skinny pins bend, and that is just a fact of life. This *VERY MINOR* finding in no way detracts from the use nor utility of this board. Well done FREETRONICS... An excellent product and a very good value.
The instructions were clear, and everything worked the first time I tried it out. Cost effective. I'm very pleased.
I've used these in about six projects so far, and I need to get some more. I use them mostly for 12V loads, but they are capable of so much more. PWM control is handy. My other favorite, if I'm low on pins or need more than 6 outputs is the "8-Channel Relay Driver Shield", also by Freetronics. It doesn't handle much current or voltage (only 150ma and 24V) and doesn't do PWM, but it uses the I2C bus so you can stack them, just change the I2C address of one of them.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at RoboItchi's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RoboItchi's troubleshooting process or of a verified shipping error by RoboItchi.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A ¥10,000 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RoboItchi's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
- Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items — Standard catalogue products not stocked by RoboItchi and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
How to Request a Return Authorization (RA)
To request a return, submit a support ticket from your account under My Support Tickets to obtain a Return Authorization (RA) number. Returns without an RA number will be refused.